Hitachi NR83A2 Nailers
Are you planning to buy a good quality framing nailer? If you are, you will find that
Hitachi NR83A2 has features that will be most suitable for you. This nailer has a 3/8 inch air inlet operating in the range of 70 to 120 PSI.
This model is priced between $270 and $330. Here is a description of some of its features and capabilities. Since the Hitachi NR83A2 is equipped with a selective actuation switch you can use this nailer in either sequential or bump firing mode.
You will want to use sequential firing mode when you have to place the fasteners precisely. When you need to work fast and do not have to worry about precision of placement, you will find the bump mode very useful.
This particular Hitachi NR83A2 model of framing nailer has a dimension of 21 x 4 x 13 inches and comes with a two-piece black top loading magazine featuring a 21 degree angle and with a capacity to hold 64-70 fasteners that are between two and three and a quarter inches long. Since this model weighs only about 8 pounds it will not tire you out when you have to work for many hours.
Hitachi NR83A2 has a rubber grip making it very comfortable to hold. With Hitachi NR83A2 you can alter the depth without having to use additional tools. If you prefer it, you can get this model without the depth adjustment capability.
The open nose design of this model allows you to easily and quickly clear jams that are bound to occur in nailers. You will therefore save a lot of time that would be otherwise wasted trying to clear such jams. When you buy a Hitachi NR83A2, you also get a pair of safety glasses and three hex bar wrenches for no extra cost.
Considering all these features and advantages that Hitachi NR83A2 you will do well to look up this model if you are shopping for a framing nailer. It will certainly prove to be a best buy for you and give you a lot of satisfaction by its efficiency and ease in handling.
DEALS ON HITACHI NR83A2 NAILERS